Tekforums
Chat => Sports, Hobbies & Motors => Topic started by: Mark on January 02, 2009, 20:44:56 PM
-
Finished the exhaust manifold tonight - I bought a T04 manifold with a big ass wastegate adapter (Going to weld a 60mm vband on to it) so I had to cut a T3 flange, and weld it to the manifold, and tap it for studs.
(http://www.mark-chapman.com/uploads/mr2/mani1.JPG)
(http://www.mark-chapman.com/uploads/mr2/mani4.JPG)
You can see here where I had to match the T3 flange up to the existing T03 flange - came out just perfect! No gaps or restrictions anywhere so should flow quite well. Nothing in this bloody escapade has been easy!!
(http://www.mark-chapman.com/uploads/mr2/mani2.JPG)
Close up of the welding, not a bad job if I do say so myself :)
(http://www.mark-chapman.com/uploads/mr2/welding.JPG)
-
I do like a nice bit of flange!
That looks heavy duty Mark, Im eagerly awaiting seeing the end result of your mechanical jigsaw puzzle come to life.
-
looking good... nice welding too... (fantastic welding compared to mien!)
-
You sure thats suitable for making a set of bag pipes? :0hnoes: :panic: :drama: