Author Topic: Complete Torrent Automation (with Plex)  (Read 35323 times)

Re: Complete Torrent Automation (with Plex)
Reply #30 on: December 19, 2014, 19:13:27 PM
This is good :

http://www.htpcguides.com/configure-sickrage-usenet-torrent-tv/


Sickrage is much better than Sickbeard at episode management and redownloading failed episodes.

Re: Complete Torrent Automation (with Plex)
Reply #31 on: July 20, 2015, 18:34:13 PM
Old thread i know but.....

i have had some great success with the script you posted, thanks for the explanation on it, really helpful. My outstanding queries are twofold, first, is there a way for the script to autoextract compressed files?

Second, my media server is my NAS and so i need to move the processed files onto it which currently errors requesting the username and password, im not sure how to add this into the script.

Off the off chance you see this, thanks again for the help so far, if you have any guidance on the above that would be awesome as well.


Re: Complete Torrent Automation (with Plex)
Reply #32 on: July 20, 2015, 22:55:28 PM
I'm not sure which bit's you're struggling with.  Sab should automatically extract rar files if the default options are already set to +unrar.

If you add usernames and passwords to the script, you'd be parsing them in plain text.  Much better to either map a drive share or make the folders open for guest access.

Edit.  I just realised this isn't about newsgroups.  You should consider it though, it's far superior to torrenting.
Last Edit: July 20, 2015, 22:58:39 PM by soopahfly #187;

Re: Complete Torrent Automation (with Plex)
Reply #33 on: July 21, 2015, 00:50:14 AM
Old thread i know but.....

i have had some great success with the script you posted, thanks for the explanation on it, really helpful. My outstanding queries are twofold, first, is there a way for the script to autoextract compressed files?

Second, my media server is my NAS and so i need to move the processed files onto it which currently errors requesting the username and password, im not sure how to add this into the script.

Off the off chance you see this, thanks again for the help so far, if you have any guidance on the above that would be awesome as well.

Sorry only just seen this, but the compressed files should already auto extract.. it may be that you need winrar installed perhaps, but the filebot site is down for maintenance at the moment?

For the username/password can you not setup your system user name and password on the NAS thus authenticating them automatically? Otherwise may be worth posting on the filebot forum, but you don't really wan tot be using plain text passwords as said by soopah :)

Re: Complete Torrent Automation (with Plex)
Reply #34 on: July 21, 2015, 13:12:09 PM
I have winrar installed, tried re-installing for good measure, nothing, just excludes them and doesnt unpack. Any ideas?

On the plus side, i did just match my log on to my windows log on, not sure why i didnt think of that earlier, cheers guys.

Re: Complete Torrent Automation (with Plex)
Reply #35 on: July 21, 2015, 14:39:31 PM






]

I also removed filenames from done.txt before re-running the script so that it didnt overlook them, but still nothing.

Last Edit: July 21, 2015, 14:50:05 PM by headlared #187;

  • Offline bear

  • Rutabaga
  • Posts: 6,323
  • Global Moderator
  • Hero Member
Re: Complete Torrent Automation (with Plex)
Reply #36 on: July 21, 2015, 19:28:14 PM
Can you use different payer that do not need unpacking ? like VLC ?

Re: Complete Torrent Automation (with Plex)
Reply #37 on: July 21, 2015, 19:50:42 PM
thats what i used to do but the aim is to have an automated plex set up so i need to unpack them. just cant figure it out

Re: Complete Torrent Automation (with Plex)
Reply #38 on: July 21, 2015, 21:23:04 PM
So... first question.. why are you using the old batch script?

Check the very first post it's now been updated, so runs entirely via filebot and utorrent (no batch file)..

The below can just be pasted in the utorrent launcher.. obviously updating your own folder names... (although this shouldn't impact unzipping, it's more elegant and less likely to fail..)

Regarding the unzipping issue.. in the screenshot of it running it shows the location of the amc.log file, can you please grab the data from that (where it is processing the rar file?)

Also can you check that the rar file appears in E:/temp? As only appears to have copied two files in your screen shots? neither of which are your rar files?

I'll be online for a bit now (unlike the filebot site) if you post up will try to respond quickly :)



filebot.launcher.exe -script fn:amc --output "D:/Media1" --log-file amc.log --action copy --conflict override -non-strict --def "ut_dir=%D" "ut_file=%F" "ut_kind=%K" "ut_title=%N" "ut_label=%L" "ut_state=%S" music=N artwork=n plex=localhost deleteAfterExtract=n clean=n excludeList=amc-input.txt "seriesFormat=D:/Media1/TV/{n}/{'S'+s}/{fn}" "animeFormat=D:/Media1/New Films/{n}/{fn}" "movieFormat=D:/Media1/New Films/{n} {y}/{fn}" "musicFormat=D:/Media1/Music/New/{n}/{album+'/'}{pi.pad(2)+'. '}{artist} - {t}"




Re: Complete Torrent Automation (with Plex)
Reply #40 on: July 21, 2015, 22:38:22 PM
You have a "WARNING" on your first screen shot, it's trying to execute a 64 bit DLL on a 32 bit system.. It's using 7 zip to extract according to the error.. although I don't think that's your problem...

I assume you are actually running a 64 bit OS install? If so you need to download the x64 version of Java.. that should fix your issue.. :)


Re: Complete Torrent Automation (with Plex)
Reply #41 on: July 21, 2015, 23:09:32 PM


Ok, uninstalled all java, put 64bit install on (you can see in the image) but still getting the same warning. Filebot forums still down as well. Any other reason this error would be thrown that you can think of?

Re: Complete Torrent Automation (with Plex)
Reply #42 on: July 21, 2015, 23:19:33 PM
does this link make any sense to you, bit over my head...

http://stackoverflow.com/questions/26895163/failed-to-load-7z-jbinding-no-7-zip-jbinding-in-java-library-path

seems like its my issue but cant figure it

Re: Complete Torrent Automation (with Plex)
Reply #43 on: July 21, 2015, 23:25:57 PM
Firstly that's a different issue in your error log, exactly the opposite issue in fact :)

before if was 64 on 32, this is 32 on 64!..

I'd suggest uninstalling 7 zip, then uninstalling filebot, then just re-installing filebot.. it may still be referring to the old java runtime..


Google is your friend for filebot, cached version of the page below:

http://webcache.googleusercontent.com/search?q=cache:PnqyJ-ZbOsAJ:www.filebot.net/forums/viewtopic.php%3Ff%3D8%26t%3D2132+&cd=1&hl=en&ct=clnk&gl=uk

Re: Complete Torrent Automation (with Plex)
Reply #44 on: July 21, 2015, 23:27:12 PM
Also make sure you have 64 bit filebot :)

Also you don't need to install 7-zip, the dll is installed with filebot..
Last Edit: July 21, 2015, 23:31:17 PM by XEntity #187;

0 Members and 1 Guest are viewing this topic.