Author Topic: Nimrod's "It might get you a Linkstation with extras if you're lucky" Guide  (Read 16222 times)

  • Offline CalG

  • Posts: 2
  • Newbie
Hi fellas.

Followed the guide and got it all setup fine :) began downloading and after a few minutes it went non-responsive and started beeping, Im on a 50Mbit connection which may be the cause?

Can I get rid of it all somehow? reflashed the latest Stevie Wonder to it but the folders that were created are locked and cant be deleted, please see the screen shot.

Does this mean everything I done is still present within the firmmware?




  • Offline soopahfly

  • Posts: 5,811
  • Hero Member
  • Bi-Winning
Currently Lighttpd is ballsed, and causes instabilities.

The dev on NZBGet doesnt seem bothered, nor does Lighttpd.  So, at the moment were SOL, unless StevieWonder released SHMOD10 with NZBGet.

You can remove the files through FTP or Telnet, using the command "rm-rf "Folder Name"
XBL Gamertag : Soopahfly82 :: PSN : Soopahfly82 :: Steam : soopahfly
:: Intel i5 4570 :: Gigabyte GA-H87M-HD3 :: 16Gb Corsair Venegance :: Radeon R9 290 :: Samsung EVO 250GB SSD :: 2x 2TB WD Black :: Corsair CX750M :: Coolermaster HAF XB ::

  • Offline Mardoni

  • Posts: 2,636
  • Global Moderator
  • Hero Member
  • On the Sofa, probably ;)
Nimrods "It might get you a Linkstation with extras if your lucky" Guide
Reply #47 on: September 27, 2010, 17:31:41 PM
Sorry chaps, Ive reduced my Linkstation to a NAS for picture and music backup.

I recently installed XBMC onto my Revo and have found that its around a million times easier to get SAB and Sickbeard running on that than it is on the Linkstation.

@CalG. I experience the same problems with my Linkstation when Dling on my 20mbit connection. I think the throughput might be too much for the little CPU in the Linkstation and causes overheating. I never proved it but Im highly suspicious.

  • Offline CalG

  • Posts: 2
  • Newbie
Hi, just tried FTP but it wont delete anything? it says all the folders are owned by root, I cant loging with these details?

I am useless with telnet :(, took me a while to get round using putty following the guide.

Can you tell me exactly which folders to remove as well please so all traces of it are gone?

Many Thanks

Can I ask what you guys are using in the way of post processing scripts? I have a legacy version of oversight that seems to work although it doesnt handle movies :(

Hi

Thanks for the how to

After adjusting lighttpd.conf as per the instructions and then starting...

root@HS-DHGL090:~# /opt/etc/init.d/S80lighttpd

I get the following issue :

Starting web server: lighttpd

2010-12-07 20:56:10: (plugin.c.131) Cannot load plugin mod_fastcgi more than once, please fix your config (we may not accept such configs in future releases

Are there any suggestions as to sorting this issue ? Thanks in advance

  • Offline soopahfly

  • Posts: 5,811
  • Hero Member
  • Bi-Winning
I think everyones essentially given up on this.  Since changing the HDD in mine I cant get it running stable.  I think its a problem with Lighttpd, but I dont know enough about it to be sure.
XBL Gamertag : Soopahfly82 :: PSN : Soopahfly82 :: Steam : soopahfly
:: Intel i5 4570 :: Gigabyte GA-H87M-HD3 :: 16Gb Corsair Venegance :: Radeon R9 290 :: Samsung EVO 250GB SSD :: 2x 2TB WD Black :: Corsair CX750M :: Coolermaster HAF XB ::

Quote from: soopahfly
I think everyones essentially given up on this.  Since changing the HDD in mine I cant get it running stable.  I think its a problem with Lighttpd, but I dont know enough about it to be sure.


I think Ill get it up and running on my WDTV Live in that case - Ive Transmission working perfectly on the Linkstation so I wont push breaking that by trying to get Lighttpd to pay ball.


Just registered to say what an amazing guide! Thanks so much. I was struggling with this myself, stumbled upon this guide and nailed it using this.

Quote from: bobskins1
I get the following issue :

Starting web server: lighttpd

2010-12-07 20:56:10: (plugin.c.131) Cannot load plugin mod_fastcgi more than once, please fix your config (we may not accept such configs in future releases

I also have this issue, however the webserver runs fine and everything seems to be stable. Does it still run with that error?

Also, could the instability for you other guys be related to the ARM/XFS issues? See http://forum.buffalo.nas-central.org/viewtopic.php?p=107566#p107566 for more info


0 Members and 1 Guest are viewing this topic.