Author Topic: HP Proliant Microserver - Purchase, Upgrade & Setup Guide  (Read 274125 times)

Re: HP Proliant Microserver - Purchase, Upgrade & Setup Guide
Reply #15 on: October 13, 2011, 21:30:05 PM
Does that not then screw on to the HD and then the you screw the mount screws to that?

  • Offline Mardoni

  • Posts: 2,636
  • Global Moderator
  • Hero Member
  • On the Sofa, probably ;)
Re: HP Proliant Microserver - Purchase, Upgrade & Setup Guide
Reply #16 on: October 13, 2011, 22:16:38 PM
There's nowhere to screw the mount to the chassis, that's part of the problem. The 5.25" bay has a quick release mechanism not screws.

Re: HP Proliant Microserver - Purchase, Upgrade & Setup Guide
Reply #17 on: October 13, 2011, 23:00:36 PM
There's nowhere to screw the mount to the chassis, that's part of the problem. The 5.25" bay has a quick release mechanism not screws.

You dont screw the mount to the chasis, there are screws that you attach to the optical drive, which are found screwed in to the inside of the door panel.

Surely you just put those screws in the mount, then slide the whole thing in?

    • Leons Lost
  • Offline Leon

  • Posts: 3,154
  • Hero Member
  • Bah Humbug!
Re: HP Proliant Microserver - Purchase, Upgrade & Setup Guide
Reply #18 on: October 14, 2011, 08:30:47 AM

You dont screw the mount to the chasis, there are screws that you attach to the optical drive, which are found screwed in to the inside of the door panel.

Surely you just put those screws in the mount, then slide the whole thing in?

That may be the case, I didn't even realise that there were spares in the door until after I had put everything together :)
.::. www.leonslost.co.uk .::. Media Server Guide .::.

PC: i5 760 .::.  GA-P55-UD3 .::. 8GB Corsair 'Dominator' DDR3 .::. 1GB EVGA GTX 460 SC .::. Win7 Ultimate  .::. Dell 24" Ultra Sharp
Netbook: HP Mini 311c-1101sa .::. 3GB Ram .::. ION Hack .::. Win7 Ultimate
Server: HP MicroServer .::. 3GB Ram .::. 4x 2TB Storage .::. 512MB nVidia 210 .::. Win7 Ultimate, XBMC 11 (Aeon NOX), Sick Beard & Couch Potato
Phone: SE Xperia Mini Pro .::. MiniCMSandwich Lite (Android ICS Custom) .::. OC @ 1.6Ghz
Tablet: Asus Transformer TF101 w/ Dock .::. EOS JB Nightlies (Android JB Custom) .::. OC @ 1.6Ghz

Re: HP Proliant Microserver - Purchase, Upgrade & Setup Guide
Reply #19 on: October 14, 2011, 09:54:56 AM
There's nowhere to screw the mount to the chassis, that's part of the problem. The 5.25" bay has a quick release mechanism not screws.

You dont screw the mount to the chasis, there are screws that you attach to the optical drive, which are found screwed in to the inside of the door panel.

Surely you just put those screws in the mount, then slide the whole thing in?

This is exactly what you do. Dang, signed in as the missus by accident!

  • Offline Mardoni

  • Posts: 2,636
  • Global Moderator
  • Hero Member
  • On the Sofa, probably ;)
Re: HP Proliant Microserver - Purchase, Upgrade & Setup Guide
Reply #20 on: October 14, 2011, 15:14:37 PM
Oh for the love of God, there are screws in the door panel ? I think it's time I go to Specsavers  :muttley:

    • Leons Lost
  • Offline Leon

  • Posts: 3,154
  • Hero Member
  • Bah Humbug!
Re: HP Proliant Microserver - Purchase, Upgrade & Setup Guide
Reply #21 on: October 14, 2011, 15:33:30 PM
Oh for the love of God, there are screws in the door panel ? I think it's time I go to Specsavers  :muttley:

haha indeed, I only noticed after I had spent a couple hours finding odd screws to secure the 4 HDD's - Doh.

Maybe put it in big text at the start of the guide?! :P
.::. www.leonslost.co.uk .::. Media Server Guide .::.

PC: i5 760 .::.  GA-P55-UD3 .::. 8GB Corsair 'Dominator' DDR3 .::. 1GB EVGA GTX 460 SC .::. Win7 Ultimate  .::. Dell 24" Ultra Sharp
Netbook: HP Mini 311c-1101sa .::. 3GB Ram .::. ION Hack .::. Win7 Ultimate
Server: HP MicroServer .::. 3GB Ram .::. 4x 2TB Storage .::. 512MB nVidia 210 .::. Win7 Ultimate, XBMC 11 (Aeon NOX), Sick Beard & Couch Potato
Phone: SE Xperia Mini Pro .::. MiniCMSandwich Lite (Android ICS Custom) .::. OC @ 1.6Ghz
Tablet: Asus Transformer TF101 w/ Dock .::. EOS JB Nightlies (Android JB Custom) .::. OC @ 1.6Ghz

    • Tekforums.net - It's new and improved!
  • Offline Clock'd 0Ne

  • Clockedtastic
  • Posts: 10,937
  • Administrator
  • Hero Member
Re: HP Proliant Microserver - Purchase, Upgrade & Setup Guide
Reply #22 on: October 14, 2011, 15:52:57 PM
I'm sure I mentioned this somewhere  :lol:

When I get my first drive and cover the unRAID setup I'll be sure to post up lots of photos and things ;)

  • Offline Mardoni

  • Posts: 2,636
  • Global Moderator
  • Hero Member
  • On the Sofa, probably ;)
Re: HP Proliant Microserver - Purchase, Upgrade & Setup Guide
Reply #23 on: October 14, 2011, 16:01:08 PM
Even with the screws the mounting bracket I received still doesn't fit right. I have to have the 4 mounting screws pretty much completely unwound in order to get the bracket to sit in the guide rail.

Hopefully this picture will highlight the short coming :/


    • Tekforums.net - It's new and improved!
  • Offline Clock'd 0Ne

  • Clockedtastic
  • Posts: 10,937
  • Administrator
  • Hero Member
Re: HP Proliant Microserver - Purchase, Upgrade & Setup Guide
Reply #24 on: October 14, 2011, 16:03:23 PM
Try rotating your brackets 90 degrees and screwing them into the side of the HDD, then it should slide snugly in and out without having to screw in at the sides (this is exactly how I mounted my 5.25" brackets with 3.5" HDD)

Is it this you're using: http://www.amazon.co.uk/gp/product/B0001UZQWG/ref=nosim/
Last Edit: October 14, 2011, 16:07:18 PM by Clock'd 0Ne #187;

    • Leons Lost
  • Offline Leon

  • Posts: 3,154
  • Hero Member
  • Bah Humbug!
Re: HP Proliant Microserver - Purchase, Upgrade & Setup Guide
Reply #25 on: October 14, 2011, 16:05:14 PM
Try rotating your brackets 90 degrees and screwing them into the side of the HDD, then it should slide snugly in and out without having to screw in at the sides (this is exactly how I mounted my 5.25" brackets with 3.5" HDD)

Sounds like this is what I did, its not screwed in to the 5.25 but more wedged :P
.::. www.leonslost.co.uk .::. Media Server Guide .::.

PC: i5 760 .::.  GA-P55-UD3 .::. 8GB Corsair 'Dominator' DDR3 .::. 1GB EVGA GTX 460 SC .::. Win7 Ultimate  .::. Dell 24" Ultra Sharp
Netbook: HP Mini 311c-1101sa .::. 3GB Ram .::. ION Hack .::. Win7 Ultimate
Server: HP MicroServer .::. 3GB Ram .::. 4x 2TB Storage .::. 512MB nVidia 210 .::. Win7 Ultimate, XBMC 11 (Aeon NOX), Sick Beard & Couch Potato
Phone: SE Xperia Mini Pro .::. MiniCMSandwich Lite (Android ICS Custom) .::. OC @ 1.6Ghz
Tablet: Asus Transformer TF101 w/ Dock .::. EOS JB Nightlies (Android JB Custom) .::. OC @ 1.6Ghz

Re: HP Proliant Microserver - Purchase, Upgrade & Setup Guide
Reply #26 on: October 14, 2011, 16:41:05 PM
I'm sure I mentioned this somewhere  :lol:


It was, but I've now added it in capitals to 2 sections above! ;)

  • Offline Mardoni

  • Posts: 2,636
  • Global Moderator
  • Hero Member
  • On the Sofa, probably ;)
Re: HP Proliant Microserver - Purchase, Upgrade & Setup Guide
Reply #27 on: October 14, 2011, 17:21:51 PM
I have employed the "Hulk Bend" methodology to the brackets and the HDD now sits in the 5.25" bay, in the brackets, snugly. The bracket's no longer have 90 degree corners but hey, it works.

...now to see if I can cancel the unwanted rack (no I can't. :p)
Last Edit: October 14, 2011, 17:26:06 PM by Mardoni #187;

Re: HP Proliant Microserver - Purchase, Upgrade & Setup Guide
Reply #28 on: December 01, 2011, 00:32:10 AM
Nice post.. just to make it more thoroughly may I point you to this set of videos HP has put together to cover most removal/upgrade activities.
Customer Self-Repair Steps (videos/animations)
regards

  • Offline Bacon

  • Lettuce Tomato
  • Posts: 5,345
  • Global Moderator
  • Hero Member
Insert signature here.

0 Members and 1 Guest are viewing this topic.