Author Topic: Hack my Linkstation  (Read 69494 times)

  • Offline Mardoni

  • Posts: 2,636
  • Global Moderator
  • Hero Member
  • On the Sofa, probably ;)
Hack my Linkstation
Reply #105 on: July 21, 2010, 19:00:26 PM
Well dont I feel like a fool.
My problems with the SSH daemon were being caused by the fact that the SHMOD9 base firmware has SSH has a built in function. I just needed to tick a box in the official firmware web GUI :s

Heres my guide (so far) thatll get a Linkstation up and running with NZBGet and its WebGui installed and fully working.

@ Soopha, Theres a section in the bottom of the guide thatll create a script which will auto load NZBGet when the device loads :)
It took a little bit of fiddling to work out but its actual quite straight forward !

Re:Hack my Linkstation
Reply #106 on: July 21, 2010, 19:49:29 PM
Cheers, Ill implement that :D

Re:Hack my Linkstation
Reply #107 on: July 21, 2010, 20:45:05 PM
For those running Steviewonder and bought a legitimate Twonky Licence*  Ive got the instructions for upgrading to the latest version.

Log into your NAS through telnet.

type the following command:

Code: [Select]

rm -rf /usr/local/twonky


this will remove the old twonky install.

Download the latest build from Twonky

6.0 Stable
6.0.1 RC5

Either one of those will do.

Edit the twonkymedia-server-default file.ini and change the httpport line to:
Code: [Select]

httpport=9050


then copy the whole folder to your NAS.  For ease, Ill use the share folder.

Go to your telnet session and type the following.

Code: [Select]

mv /mnt/disk1/share/twonky /usr/local/twonky


reboot the nas, and then youll have the latest Twonky.
Pop your serial number in and away you go.








* Not saying the bundled Twonky isnt legit.  Its an old pre-bundled version for Linkstations

0 Members and 2 Guests are viewing this topic.