Then it rained last night and looked like someone had chucked a bag of sand on it so did it again this morning :rolleyes:
Just got the car back from API engines, long story but now has a new 2.5 lined block, wossner forged pistons, forged rods and race bearings. Currently running in so limited boost but very pleased with it, remap at the end of the month and should be good for an easy and safe 400+ bhp and torque..
Still havent decided though if Im gonna keep it, love the car but totally impractical / expensive for my daily commute..
Anyways - hope you enjoy !
(http://img.photobucket.com/albums/v21/Bartop/scoobynew007.jpg)
(http://img.photobucket.com/albums/v21/Bartop/scoobynew003.jpg)
(http://img.photobucket.com/albums/v21/Bartop/scoobynew005.jpg)
(http://img.photobucket.com/albums/v21/Bartop/scoobynew010.jpg)
(http://img.photobucket.com/albums/v21/Bartop/scoobynew019.jpg)
(http://img.photobucket.com/albums/v21/Bartop/scoobynew017.jpg)
Looks nice mate. That sand stuff really pisses me off. Spend £15 getting the car cleaned and then the next day it looks like a bloody sandcastle :(
Only my monitor makes that look dirty!!
Why get a load of engine work done to it, which if increasing HP will probably increase fuel consumption if its costing to much. Is it not good enough standard? And maybe if it was standard itd be a viable work automobile ?
As I say, long story but the car already had forged pistons, but started using more and more oil.
Couldnt sell it as is so took it back to API and they diagnosed damage to 2 pistons and bores. Decided to get the forged rods and race bearings done as incremental cost was minimal and makes the car much stronger and possibly more desirable if I do sell it..
Nice looking car!
Don;t let the VW lads know I said this but.
I actually like it ;)
Cleaned my golf all today after I got a horrible layer of sand on it, got some photos to come tomorrow :)
Quote from: BartopAs I say, long story but the car already had forged pistons, but started using more and more oil.
Couldnt sell it as is so took it back to API and they diagnosed damage to 2 pistons and bores. Decided to get the forged rods and race bearings done as incremental cost was minimal and makes the car much stronger and possibly more desirable if I do sell it..
Whats the standard rods like ?
A set of totalseal gapless top rings would (imo) be a good safe top off to the new pistons - I used wiseco in my newest rebuild, as wossener are too dear
Standard rods are good but worth replacing at 400+
Must admit the Pistons were recommended by API, had never heard of them myself..
Scoobies arnt my thing, but yours is always a joy to behold and the pride you take in her really shows :cheers: 8-)
Quote from: BartopStandard rods are good but worth replacing at 400+
Must admit the Pistons were recommended by API, had never heard of them myself..
They are good - used them before in another project, but they are v dear compared to the likes of the wiseco - which are as good (In some applications better) so there are no worries about them doing the job for you. wossner carry a 50% premium over other brands for some reason
As long as the rods arent eagle rods youre landed - crower or the likes are very good
Quote from: Poison_UKDon;t let the VW lads know I said this but.
not all the VW lads have scene blinkers. tis a lovely looking scoob.
do you find yourself a victim of its image at all chap? you know, tough stares, lots of stuff wanting to race etc?
Matt
Sand...or pollen?
Sorry to nitpic :whoops:
Dont get any problems at all with the image tbh, weird as you would expect it I think..
.was definately sand, widely reported as well cross tinterweb, apparantly bought in from a sandstorm in the Sahara according to the BBC..
my car is covered in dust/sand at the mo, i just put it down to the cement works a couple of miles away. Sahara sounds better though.
Today on the road I saw numerous RS4s, Porsches and a Lambo Murcielago *swoons*, as well as a very low riding convertible sportscar I couldnt identify, with two logos on the back in this same oval black and white style:
(http://img392.imageshack.us/img392/9421/833nk4.jpg)
did it have that badge or just one like it?
Austin Healey maybe?
Just a similar badge, I dont think it was Healy, it looked very modern, a similar shape to the corvette Chris Tucker drives in Rush Hour, and in blue with cream interior.
Quote from: Clockd 0NeJust a similar badge, I dont think it was Healy, it looked very modern, a similar shape to the corvette Chris Tucker drives in Rush Hour, and in blue with cream interior.
so a very modern looking car that looks like a 1970s Vette? :P
not many cars use a badge like that anymore, could have been a Shelby Cobra maybe.
:P
Well its hard to describe, it had a similar shape to this Healy http://www.dragtimes.com/albums/Los-Angeles-Concours-2007/Austin_Healy_100.jpg, but more squared and the bonnet had a bit air vent on it, maybe it was a customised one or some kind of kit car? There was no chrome on it either.
not a shelby cobra? http://www.dreams-cars.net/images/Galerie/Shelby/Shelby_Cobra_427_1967/Shelby_Cobra_427_1967_01.jpg
i beleive there is a new Austin Healey being made at the moment, maybe you saw a test car?
http://www.autoblog.com/media/2006/01/tempest_healey.jpg
Nah it definitely wasnt a Cobra, Id know one of those straight away. It was less modern than the Tempest one too.