« previous next »
Pages: 1 2 [3] 4

Author Topic: Telnet Access for Buffalo Link Sation Live  (Read 7237 times)

Re:Telnet Access for Buffalo Link Sation Live
Reply #30 on: May 06, 2010, 16:25:17 PM
No, thats it.  All TFTP does is serve the unit the boot file.

Now you need to get the latest firmware for the device from Buffalo and update it.
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #31 on: May 06, 2010, 16:32:18 PM
Downloading at the minute.  

Does it matter that it cant be seen in nas navigator?  Used angry IP to scan the range but no IP address for it found.

Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #32 on: May 06, 2010, 16:32:53 PM
Not sure.  Can you post a screenshot of the TFTP window?

It should look something like this :



See at the bottom where it gives the device an IP?
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #33 on: May 06, 2010, 16:39:13 PM
Thats excatly what it gave me.  Same IP and all 192.168.11.150.  

I have a flashing blue ligh on the unit, I rebooted it and got the 7 reds again, so done tftp again and serverd the blocks, just waiting on the firmware DL to see if I can re flash it.
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #34 on: May 06, 2010, 16:41:42 PM
Sounds like youre cooking on Calor!

Read Step 4 in this guide.
You need to modify the lsupdate.ini file
http://buffalo.nas-central.org/wiki/Revive_your_arm9_box_from_scratch
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #35 on: May 06, 2010, 16:45:14 PM
I have the firmware 1.24 and 1.26 on my lappy at home.  Ill try that when i get in and let you know

Cheers for your help amigo.

You LEGEND!

 :bowdown:  :bowdown:  :bowdown:  :bowdown:  :bowdown:  :bowdown:  :bowdown:  :bowdown:  :bowdown:  :bowdown:  :bowdown:  :bowdown:
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #36 on: May 06, 2010, 16:46:37 PM
No probs.

I should be online later, so Ill keep checking in.  If you get stuck, give me a shout.
I thinks its very difficult to kill one of these things, as the boot files are stored on the HDD as opposed to a chip.
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #37 on: May 06, 2010, 22:39:32 PM
No luck mate.

LSUpdater not seeing the unit to install the firmware   :whoops:
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #38 on: May 06, 2010, 23:10:26 PM
Is it seeing the device far enough to pull in the boot files through TFTP?

In all honesty, I wouldnt worry at all about the data on the HDD.  If you download Knoppix, you can get the data off the drive before taking the drastic measures.

I had a unit that wouldnt read TFTP, couldnt force the flash or anything.
I took the drive out, removed all the partitions, put back in the box and it prompted EM mode, and a successful recovery.
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #39 on: May 07, 2010, 09:23:45 AM
Morning matey.

It  basiclly does what you have in the screen shot.  The only thing is, when I ran the TFTP boot, and piwered up the unit, I got the red lights after about 15/20 seconds.  So I hitthe fucntion button then tftp seemed to kick in.  Left a ping running constant to 192.168.11.150 to see if I got a reply.  No luck.

Debting about just letting the TFTP run over night and see if it maybe sorts it.
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #40 on: May 07, 2010, 10:21:36 AM
That does kinda sound fluffed.

Id download knoppix and have that standing by for disaster recovery.  Then once its safe we can do a manual flash.
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #41 on: May 07, 2010, 10:31:43 AM
Sounds good.  As long as I got the music and photos of it. Thats all that matters
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #42 on: May 08, 2010, 11:49:20 AM
Backed it up yet?
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #43 on: May 11, 2010, 21:59:48 PM
Dude, its panic stations, got knoppix and went in to see if the data was there.  Not showing me anything on the disc!!  

I have a USB caddy and the drive is plugged into that, windows see the disc in the computer manager but doenst recgonise the volumes.  Lnoppix sees the volumes, when I mount the volume it just says 991 free.  But for some reason it has the default share and spool folder so I dont know if the data is still there or maybe I have done something worng.  Complete linux n00b!!

Please help!!
 :stupid:
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #44 on: May 22, 2010, 10:32:20 AM
That sounds bad!  The work we have performed so far will not have removed any data from the drive.

You need to "Find" this software : http://www.ufsexplorer.com/rdr_xfs.php
and that should recover everything.
Logged
Pages: 1 2 [3] 4
« previous next »

0 Members and 1 Guest are viewing this topic.