Apologies for the lack of pictures in this thread.
After mastering the art of installing a Zagg Shield on my Galaxy S, I thought I would pass on the knowledge to perfect screen protector fitment.
I've bought an Advent Vega Android Tablet, and an Advent Vega screen protector.
Cheap B*stards at PC World only provide a screen protector, a tiny cloth and a card about 1cm squared.
You will need.
Camera Lens cleaning fluid.
Plastic card (Credit/Debit card, driving licence etc)
Travel size empty spray bottle, like this
http://images.madeinchina.com/68088CCF1AD82C49E040007F01001CDD/423/6539423_1/Empty-Travel-Size-50ml-Plastic-Spray-Bottles_6539423_1.bak.jpgEmpty the lens cleaning solution into the spray bottle.
lightly spray the screen and clean it to within an inch of it's life.
Spray again, but a little heavier this time.
Spray your fingers with the solution, so you can handle the screen without finger prints.
Remove the sticky backing and spray it.
Now you can place your screen protector.
Don't worry about bubbles, just the position.
Once it's in place, use your plastic card to push the bubbles to the edge. Use a cloth to wipe away the excess.
If you spot any dust under the protector, you can peel it back and remove, making sure to lightly spray it again.
Repeat until you have all the big bubbles out. There will be some small bubbles left over, but they will disappear within 48 hours.