I got a Sony Vaio VGN-FZ18L laptop and was wondering if I can upgrade my internal HDD? Is it just a case of swapping the unit out for a new one? Ive had the thing in pieces today fixing the power and SD-Card reader - so I have no worries about actually doing it. I just wanted to know if it was like buying a desktop drive? Will things like power become an issue? Do I have to stick to certain models for compatibility?
some thicker drivers 13.5mm may not fit. most are9.5mm these days
and shouldnt cause a problem as long as the bios supports it
Any ideas how I find out if the BIOS will do it?
Quote from: ERUAny ideas how I find out if the BIOS will do it?
depends on laptop age
I would assume your laptop is new enough to support everything available today.
I would assume it being sony - then it would need to be a 9.5mm in height
13.5mm are quite rare these days anyway.
Cheers - ill crack on then :)
Even though youre going ahead, Ill chip in with the fact I swapped my dell laptops hdd with no problems whatsoever. Just like a 3.5" drive tbh, except theres a few extra screws!
Quote from: zpyderEven though youre going ahead, Ill chip in with the fact I swapped my dell laptops hdd with no problems whatsoever. Just like a 3.5" drive tbh, except theres a few extra screws!
and also they are more tiny
you will of course already be aware that the distance a dropped screw will bounce is inversely proportional to its size, and screws smaller than you can comfortably see at a distance of 6 feet are not bound by the normal laws of physics in terms of which direction they will bounce.
A screw containment unit (sometimes called a tin) is advisable.
Quote from: MongooseQuote from: zpyderEven though youre going ahead, Ill chip in with the fact I swapped my dell laptops hdd with no problems whatsoever. Just like a 3.5" drive tbh, except theres a few extra screws!
and also they are more tiny
you will of course already be aware that the distance a dropped screw will bounce is inversely proportional to its size, and screws smaller than you can comfortably see at a distance of 6 feet are not bound by the normal laws of physics in terms of which direction they will bounce.
A screw containment unit (sometimes called a tin) is advisable.
as is bluetac on the end of a screwdriver