fried the controller board
500GB, SATA II, 16MB
model ST3500641AS,
P/N 9BD148-304,
Firmware 3.AAJ,
site code AMK
nobody?
prepared to pay *new* price as well - so £75ish
Open up your computer - order yourself a 750gb & then sell me your
500GB, SATA II, 16MB
model ST3500641AS,
P/N 9BD148-304,
Firmware 3.AAJ,
site code AMK
Sorry mate only Seagate I got is a 170gb drive :(
Have you tried contacting Seagate to see if they can help?
http://www.seagate.com/www/en-gb/about/contact_us/
Quote from: White GiantHave you tried contacting Seagate to see if they can help?
http://www.seagate.com/www/en-gb/about/contact_us/
no because I need to RMA the old HDD once the data is recovered.. cant go telling them I fried it -)
think I may be sorted
thanks to this guy http://myworld.ebay.com/harddrivespecialist/
also anyone in a simlar boat may be worth giving http://www.deadharddrive.com/forums/index.php a try
If that falls through, I think I can help...
Quote~ $ sudo hdparm -i /dev/sdb
/dev/sdb:
Model=ST3500641AS , FwRev=3.AAD , SerialNo= 3PMXXXXX
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=16384kB, MaxMultSect=16, MultSect=?16?
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,
the firmware doesnt match up, so that one wouldnt work :-(
Ah. Can the firmware not be updated?
Quote from: RobAh. Can the firmware not be updated?
possibly.. looks like Ive been sorted now. £25 with delivery for a replacement board.
Board turned up today, 12 screw motions later & my Drive is working again..
300 xvids & life on mars saveds :ptu:
thanks for the link to the deadharddrive forum egg
Ive posted in the wanted section there myself
Hi Egg
I have the same hard disk & had my controller board fried up as well.
Could you tell me whre you bought the PCB?
Thanks
Gowtam
damaged disk:
500GB, SATA II, 16MB
model ST3500641AS,
P/N 9BD148-304,
Firmware 3.AAJ,
site code AMK