Well dont I feel like a fool.
My problems with the SSH daemon were being caused by the fact that the SHMOD9 base firmware has SSH has a built in function. I just needed to tick a box in the official firmware web GUI :s

Heres my guide (so far) thatll get a Linkstation up and running with NZBGet and its WebGui installed and fully working.

@ Soopha, Theres a section in the bottom of the guide thatll create a script which will auto load NZBGet when the device loads
It took a little bit of fiddling to work out but its actual quite straight forward !

Cheers, Ill implement that

For those running Steviewonder and bought a legitimate Twonky Licence*  Ive got the instructions for upgrading to the latest version.

Log into your NAS through telnet.

type the following command:


rm -rf /usr/local/twonky


this will remove the old twonky install.

Download the latest build from Twonky

6.0 Stable
6.0.1 RC5

Either one of those will do.

Edit the twonkymedia-server-default file.ini and change the httpport line to:

httpport=9050


then copy the whole folder to your NAS.  For ease, Ill use the share folder.

Go to your telnet session and type the following.


mv /mnt/disk1/share/twonky /usr/local/twonky


reboot the nas, and then youll have the latest Twonky.
Pop your serial number in and away you go.








* Not saying the bundled Twonky isnt legit.  Its an old pre-bundled version for Linkstations