Hi guys built my first ever pc well happy but can you tell me if my yemps are oki i just downloaded core temp don,t know how to post it on here so i type it.

TJ MAX:98 C
CORE 0=33
CORE 1=33
CORE 2=33
CORE 3=33 But they are jumping around between 19 and 33


LOW
CORE 0=22c
CORE 1= 19c
CORE 2= 23
CORE 3= 18C

HIGH
CORE 0=34c
CORE 1=34c
CORE 2=35c
CORE 3=34c

anything else i should check?

Those are all quite low if anything I would say, the sandybridge chips must run really cool?

Try stress testing the CPU using LinX and see what they creep up to.

hi im well pleased i don,t know how to use linx but i,m running prime95 on it at the moment temps so far after 10 mins are between low 34/36 and high is between 41/45 is that ok?

To be honest they are really good temps, the old athlons used to run 60-90 at times!

Hi m8 so its all ok then nothing i have to worry about,i have never built a pc before so don,t know what i shpuld be looking for my 4 cores are between 40/45 low is now between 34/39 and high is between 41/45 if thats oki i stop running prime now

Your temps are low, if your CPU was a fat man on a treadmill he wouldn't even be sweating yet.

Quote from: Clock'd 0Ne on March 09, 2011, 23:45:18 PM
Your temps are low, if your CPU was a fat man on a treadmill he wouldn't even be sweating yet.

Ha!

lol thanks guys i,m still running prime but the temps are not moving still the same thanks for putting my mind at rest  .now time to install all the drivers 

Are you running 4 instances of prime? ...if you are your temps are fine, IMO anything under 70 is good for 24/7 use

Hi m8 i think so i just left it on default when i ran it didn,t touch the settings at all but i ran it for over 40 mins and the temps didn't move really,first time for me so pleased its running ok i got it on a h50 and from what you lot are saying its keeping it cool and i did the cpu paste as a pea size in the middle seems to do the trick  now just need to work out how i can do a little oc on it,that be a job tomorrow i think  thanks again guys