« previous next »
Pages: [1] 2 3 4

Author Topic: Telnet Access for Buffalo Link Sation Live  (Read 7239 times)

Telnet Access for Buffalo Link Sation Live
on: April 26, 2010, 22:02:59 PM
Need help people.

Got myself that twonky media server to install on my buffalo LS-CHL 1.0TB NAS.  But by fook can I get port 23 opened on the bastard to install it.  I have the latest firmware version 1.24 installed.  is

I have used the acp_commander, it tells me that port 23 is opened and the root password is reset, but when I run telent to connect to the IP all i get is "Could not connect to the host, on port 23: connection failed.

I have been through google dont know how many times and still no luck.  Any help would be great!!
Logged

  • Offline Mardoni

  • Posts: 2,636
  • Global Moderator
  • Hero Member
  • On the Sofa, probably ;)
Telnet Access for Buffalo Link Sation Live
Reply #1 on: April 27, 2010, 09:19:52 AM
Ill try and fire mine up again later. Its been sat in the corner looking sad since the last time I completely screwed it over :)

Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #2 on: April 27, 2010, 15:51:10 PM
1st things 1st, make sure youre using putty.
Reset the linkstation using the interface and run acp_commander again, making sure you are elevated.

Putty just makes things easier :D
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #3 on: April 27, 2010, 21:41:25 PM
Ok, got putty,

what you mean reset ?  Factory default or just a reboot via the web console?  And by elevated I assume you mean logged in as admin.
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #4 on: May 01, 2010, 09:51:17 AM
Sorry, forgot about this thread.

Using the web console, hit the factory reset.  You wont lose data but it will reset the root password.

If you are using StevieWonder, this is a required step.
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #5 on: May 02, 2010, 16:13:12 PM
WHats StevieWonder?  

Think I may have bricked my unit.  Tried a firmware down grade I got on another forum, but I cant access the drive.  No flashing red lights, still getting the blue light, but when I do a factory reset the device cant be found on the network.  C**k!
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #6 on: May 02, 2010, 23:26:20 PM
Blue Light?  Mine are green!

Whats the model number of your Linkstation, as they dont have Telnet out the box.
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #7 on: May 03, 2010, 10:10:47 AM
Mines the Linkstation LS-CHL 1.0TB

Blue lights on mine
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #8 on: May 03, 2010, 12:26:30 PM
Ah, fair enough.  Mines a V2.

It shouldnt be too bad if youve bricked it.  It should respond to TFTP.
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #9 on: May 03, 2010, 18:59:57 PM
Gave in and rang buffallo, they have sent me instructions on how to get it into EM mode.  FIngers crossed

How do you get into TFT Boot
Logged
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #11 on: May 06, 2010, 09:46:27 AM
Breaking my heart this....grrrrr

Havent been able to get it into EM mode.  Gonna try the TFT Boot.  Might be fecking this thing at wall!!
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #12 on: May 06, 2010, 12:46:35 PM
When Ive had my lunch, Ill talk you through it.

How much data is on the drive?
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #13 on: May 06, 2010, 14:40:26 PM
1Tb

Brought thedrive in with me to work since we are quite
Logged
Re:Telnet Access for Buffalo Link Sation Live
Reply #14 on: May 06, 2010, 15:06:22 PM
So the drive is full?

That might make it problematic.
Is it backed up anywhere? As I have a guaranteed way to get it into EM mode, but it will cost your data.
Logged
Pages: [1] 2 3 4
« previous next »

0 Members and 1 Guest are viewing this topic.